1. This sloting machine is widely used to machine flat surfaces, mould surfaces (including arc surfaces), key slots in tapered holes, key slots in cylindrical holes, splines, squre holes and polygonal holes on parts. It can also slot parts set to an inclination angle in the range of 0 10 Degrees. It is espeically suitable for machining key slots in blind holes or holes with shoulders (i. E., stepped holes). This slotting machine is popularly operated in the single-piece or small-batch production in workshops;
2. The worktable feeds in three directions- the longitudinal direction, the cross direction and the rotary direction thus the multiple surfaces on a workpiece can be machined in one single setup of the workpiece;
3. The slotting ram's reciprocation is driven by a hydraulic cylinder and the hydraulic transmission mechanism. The ram keeps a constant speed in every travel to perform stable slottings and its speeds and the worktable feeding speeds can be steplessly adjusted.
4. The hydraulic control console has the direction-changing mechanism to reciprocate the ram's motion. The worktable can be moved both hydraulically and manually. The worktable can be automatically fed and perform rapid trasverse driven by a special electromotor on this slotting machine.
5. This slotting machine integrates the advantages of the mechanical control & drive, the electrical control & drive, the hydraulic control & drive to perform very convenient and easy operations.
| Specifications |
Unit |
SM1000YE |
| Max. stroke length of ram |
mm |
1000 |
| Min. stroke length of ram |
mm |
125 |
| Max. slotting length |
mm |
1000 |
| Distance of vertical adjust of ram |
mm |
1090 |
| Extreme high speed for work stroke of ram |
m/min |
22 |
| Extreme low speed for work stroke of ram |
m/min |
5 |
| Speed ratio of work stroke and return stroke of ram |
|
1:1.45 |
| Speed adjust for work stroke |
|
Stepless |
| Max. slotting force |
KN |
27 |
| Distance from tool holding surface to column front |
mm |
1151 |
| Distance from worktable surface to lower end of ram |
mm |
1250 |
| Max. longitudinal travel of worktable |
mm |
1400 |
| Max. cross travel of worktable |
mm |
1100 |
| Diameter of worktable |
mm |
Ø1400 |
| Inclination of ram |
Degrees |
0 - 10 |
| Feed range of worktable in longitudinal direction |
mm |
0 - 1.5 |
| Feed range of worktable in cross direction |
mm |
0 - 3 |
| Rotary feed range of worktable |
Degrees, Minutes |
0 - 1°15' |
| Max loading weight on worktable |
kg |
4000 |
| T-slot width in the center of worktable |
mm |
28H8 |
| Power of main motor |
KW |
11kW; 960r/min |
| Power of motor for rapid traverse |
KW |
1.5kW; 940r/min |
| Type of motor for cooling pump |
|
DB-12B 40W 380V |
| Net weight (Approx.) |
kg |
15500 |
| Dimensions of machine (L × W × H) |
mm |
4125 × 2755 × 4888 |
Audited Supplier 
){kind=link}
){kind=link}