This oil country lathe meets the special requirements of users in the petroleum, geological, mining and chemical industries, and in agricultural irrigation and drainage. It is able to cut various straight and taper pipe threads of casings, drill pipes, union joints, drill collars, casing pipes, drain pipes, water pump pipes more economically and efficiently as compared with the engine lathe. Moreover, this oil country lathe can serve as an engine lathe to cut various metric, withworth and module threads, shafts and disks. After all this country lathe is an ideal machine for the petroleum, mining geological, chemical and agricultural industries.
1. The country lathe is equipped with a tapering unit which can work out a ± 1: 4 taper
2. The country lathe is able to cut both metric and with threads without changing the translating gear.
3. The dripping worm in the apron can protect the mechanisms of the lathe automatically.
4. The guide way is hardened and finely finished.
5. The great power of the country lathe is competent at heavy load and power cutting.
6. The floor center rest can be moved freely as required by the user. The center rest is provided with an adjustable clamp unit for long pipes, greatly reducing intensity of labor.
7. The 4-jaw head stock offers free clamp of both short and long pipes.
 4-jaw manual chuck with steel body, dia. Of 1000mm, 2 sets
 Steady rest (fixed steady), range 50 to 590mm with bearing type, 1 set
 Follow rest (traveling steady with tips), range 50 to 220mm 1 set
 Cooling system, 1 set
 Lighting device, 1 set
 Taper turning device, length 300mm, 1 set
 Living center, 1 set
 Dead center, 1 piece
 Center sleeve, 1piece
Set of machine operating tools
|Specifications||Model OCL360X3000, Engine type|
|Max. Swing over bed||1000 mm|
|Max. Swing over carriage||640 mm|
|Distance between two centers||3000 mm|
|Width of bed||755 mm|
|Diameter of spindle inner hole||360 mm|
|Min. Clamped diameter of chuck||240 mm|
|Range of spindle speed||6.3 to 315 r. P. M. With 18 steps|
|Main motor power||22 kw|
|Kind of metric thread and pitch range ||56 kinds 1 to 120 mm|
|Kind of whitworth thread and range ||37 kinds 30 to 1.125 teeth/in.|
|Kind of modular thread and range ||46 kinds 0.5 to 60 mm|
|Kind of radial thread and range ||46 kinds 0.5 to 60 d. P.|
|Tool section ( H × W )||45× 45 mm|
|Max. Travel of toolpost||300 mm|
|Max. Travel of cross slide||695 mm|
|Rapid traverse of saddle||3740 mm/min|
|Rapid traverse of cross slide||1870 mm/min|
|Rapid traverse of topslide||935 mm/min|
|Diameter of tailstock sleeve||160 mm|
|Travel of tailstock sleeve||300 mm|
|Taper for taper hole of tailstock sleeve ||Metric No. 80|
|Machining length of taper scale||300 mm taper turning, ± 1: 4|
|Net dimension of machine||6100× 2045× 1915mm|
|Net weight of machine||12500kg|