Customization: | Available |
---|---|
Certification: | ISO9001:2000, CE, ISO 9001:2008, GS |
Application: | Milling Machine |
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
Specifications | UDH80 | UDH100 | UDH125 | UDH160 | |
Center height, mm | 80 | 100 | 125 | 160 | |
Swivel angle of spindle from its horizontal position (upward), Deg | ≤90 | ≤ 95 | |||
Swivel angle of spindle from its horizontal position (downward), Deg | ≤6 | ≤ 5 | |||
Rotating angle of spindle responding to one revolution of handle, Deg | 9 (540 grad., 1 each) | ||||
Min. reading of vernier, Sec | 10 | ||||
Worm gear ratio | 01:40 | ||||
Taper of spindle bore | MT3 | MT4 | |||
Width of positioning key, mm | 14 | 18 | |||
Diameter of short taper of spindle nose for mounting flange, mm | 36.541 | 41.275 | 53.975 | 53.975 | |
Number of holes on indexing plate | 1st plate | 24, 25, 28, 30, 34, 37, 38, 39, 41, 42, 43 | |||
2nd plate | 46, 47, 49, 51, 53, 54, 57, 58, 59, 62, 66 | ||||
Changing gear | Module | 1.5 | 2 | ||
Number of teeth | 25, 30, 35, 40, 50, 55, 60, 70, 80, 90, 100 | ||||
Individual indexing error of the spindle for one revolution of handle, Sec | 60 | ±45 | |||
Cumulated error at any 1/4 periphery of spindle, Min | ±1 | ||||
Max. load capacity, Kgf | 80 | 100 | 130 | 130 | |
Net weight, Kgs | 36 | (63) 67 | (104) 110 | (120) 130 | |
Gross weight, Kgs | 45 | (75) 79 | (120) 126 | (139) 149 | |
Packing size (LXWXH), cm | 54X40X22 | 62X46X26 | 64X53X31 | 71X54X34 |