- CNC roller grooving machine esigned for automatically slotting Polyurethane rollers. Its Fanuc 0i-TF CNC controller has been specially programmed to be adapted to the technologies required in machining various kinds of slots. This CNC roller grooving machine can perform machining as a conventional lathe as well. Its advantages are easy operations, high efficiency, high performance accuracy and dependability.
- All servomotors inclusive of the main motor, the X-axis motor, the Z-axis motor are Fanuc made to be fitted on this CNC roller grooving machine.
- All electric components are under Siemens brand.
- 1200mm Wide bed high-frequency quenched and precision hardened for a long service life. Two V ways combined with two flat ways enable the machine to carry heavy load with high rigidity.
- The spindle on this CNC roller grooving machine is supported on SKF bearings listed as below:
Model |
NN3040KW33P5 |
32232P5 |
51232P5 |
Qty. |
1 Set |
1 Set |
1 Set |
6. Heavy duty spindle with diameter of 220mm and nose as A2-15 short-taper direct mount on this CNC roller grooving machine.
7. Heavy duty OD 1000 mm 4-jaw chuck has its base made of steel and its jaws as independent bolt-on jaws.
8. Weight loading capacity between the chuck and the tailstock center is 10 Metric Tons on this CNC roller grooving machine.
9. Tool post is manual 4-station type for holding tool shank of 80x80mm sectional size. Milling head with independent motor is an option. On request a grinding attachment can be supplied with the CNC roller grooving machine.
10. Bed ways are protected by telescopic covers along the whole longitudinal traveling distance. Cross slide's guide ways (X-Axis direction) are protected with telescopic covers.
Specifications |
CNC-RS2200X4000 |
Swing over bed |
2200 mm |
Swing over saddle |
1800 mm |
Maximum workpiece length |
4000 mm |
Maximum workpiece weight between chuck and the tailstock's center (w/o steady rests) |
10000 KGs |
Bed width |
1150 mm |
Cross travel (X-Axis) |
1100 mm |
Cross travel rapid speed |
1500 mm/Minute |
Longitudinal travel (Z-Axis) |
4000 mm |
Longitudinal travel rapid speed |
1500 mm/Minute |
Spindle speeds |
1 -200 RPM, Stepless |
Spindle nose chuck mount |
A2-15 short-taper direct mount |
Spindle nose bore taper |
MT #5 |
Main motor |
36 N.M, Servo motor, Fanuc |
X-axis motor |
28 N.M, Servo motor, Fanuc |
Z-axis motor |
20 N.M, Servo motor, Fanuc |
Tool post |
4-Station, manual |
Tool shank |
80 x 80 mm |
Tailstock quill diameter |
180 mm |
Tailstock quill travel |
300 mm |
Tailstock quill taper |
MT #6 |
CNC controller |
Fanuc 0i-TF |
Power consumption |
415V/3-Ph/50Hz |
Machine overall size, Length x Width x Height, mm |
7000 x 2500 x 2500 mm |
Machine net weight, KGs |
22000 KGs, approx. |