1. General Description
This CNC-OCL520 X 1700 Model CNC Control oil country lathe is widely used to turn the end of various kinds of pipes. Moreover, it has the functions of a general-purposed lathe. The FANUC 0i mate CNC control system and the full-digital AC servo system are equipped on this oil country lathe.
2. Main Components
2.1 Machine Base
The one-piece construction machine base, the headstock frame, the carriage case, the cross slide and the tool post are made of the high-strength and high-density close grained HT-250 grey cast iron with the resin sand casting processes. They have been processed with three steps of aging treatments including the natural aging treatment of more than 6 months to eliminate the internal stress and retain their stable accuracy in a long time.
Bed ways have been supersonic frequency induction quenched and precision ground on a precision guide way grinder. PTFE anti-abrasion soft belts with low friction coefficient are coated on the guide ways on both the carriage and the cross slide to improve the precision of the bed ways and prolong the service life of the lathe.
2.2 Headstock
The 37 KW powerful AC variable frequency motor is controlled by the AC frequency conversion control system and drives the spindle through the narrow V belts and the speed-changing mechanism. The spindle, being shifted in nine steps, runs at infinitely variable speeds in a range of 6 – 205 RPM.
2.3 Feeding Movements
Both the Cross feeding (X axis) and the longitudinal feeding (Z axis) are driven by an independent AC servo motor via the synchronous toothed belt and the precision ball screw pair. Thus the rapid traverses and feeding movements on both the X axis and the Z axis are performed at infinitely variable speeds. The X axis and the Z axis are controlled with semi closed loop using the encoder.
The carriage guide ways are processed with medium frequency quenching and precision grinding and coated with PTFE to prevent the carriage from taking the stick-slip motions on the guide ways.
2.4 NC Turret
4-Station NC turret is equipped with this machine. It features high precision with repeatability of 0.005 mm, stable swivel and simple motions.
2.5 Tailstock
The design of the stock features high rigidity, loading capacity and convenient operations. The center in mounted internally. The diameter of the quill is 140 mm and it has high rigidity and revolution accuracy.
2.6 Cooling System
Under the foundation level of the lathe, there is a special coolant reservoir. The coolant is pumped out and flows along the pipeline to the cutting area to improve the cutting conditions.
2.7 Lubrication System
The central quantitative automatic lubrication device lubricates the ball screw pairs and bed ways periodically.
2.8 Hydraulic System
The hydraulic system lubricates the headstock and the automatic shifts of the changing gears in the headstock. The main hydraulic components are made in Taiwan. The hydraulic system works reliably and is convenient to maintenance.
2.9 Auxiliary Supporting
The auxiliary supporting device is available as an option for this lathe.
3. Machine Performance Accuracy
Positioning Accuracy, X-Axis: 0.03 mm / 1000 mm
Positioning Accuracy, Z-Axis: 0.04 mm / 1000 mm
Repeatability, X-Axis: 0.012 mm
Repeatability, Z-Axis: 0.016 mm
Dimension Tolerance: IT 7 Grade
Surface Roughness, Finish Cylindrical Turning: Ra3.2 μ M
Roundness, Finish Cylindrical Turning: 0.02 mm
Cylindricity, Finish Cylindrical Turning: 0.025 mm / 300 mm
Flatness, Finish Face Turning: 0.025 mm / 300 mm
Thread Pitch Tolerance: 0.015 mm / 60 mm
Model |
CNC-OCL520 X 1700 |
|
|
General Parameters |
Swing over bed |
1200 mm |
Swing over cross slide |
610 mm |
Bed width |
755 mm |
Maxi. workpiece length between centers |
1700 mm |
Spindle bore diameter |
520 mm |
Pipe threads diameters range |
330 - 510 mm |
Headstock |
Spindle speeds |
6- 205 RPM, 9 Steps |
Spindle bore diameter |
520 mm |
Main motor power |
37 KW |
Feeding System |
Tool post cross travel |
500 mm |
Carriage longitudinal travel |
1250 mm |
Tool Post |
Vertical distance from spindle centerline to tool mounting datum plane |
40 mm |
Tool shank sectional size |
80x80 mm |
|
|
Tailstock |
Diameter of quill |
140 mm |
Quill travel |
300mm |
Taper of quill bore |
MT #6 |
Tailstock cross adjustment |
±25 mm |
Power Supply |
Main motor |
37 KW, 1460 RPM |
Clamping motor |
3 KW, 1420 RPM |
Gear pump |
2.5 MPa, 1450 RPM |
Cooling System |
Coolant pump |
0.15 KW, 22 L/Minute |
Overall Size and Net Weight |
Overall size, LxWxH |
5000x2200x1750 mm |
Net Weight |
15000 KG |