1. High-density, high-strength and close grain grey cast iron made machine's structural components / parts such as the base, the column, the ram, the worktables, etc.;
2. All guideways and worktable surfaces are high-frequency hardened and precision ground to obtain high accuracy in operations;
3. Three worktables inclusive of one horizontal table, one vertical table and one swivel table. The swivel table can be freely detached and fixed at any desired positions;
4. The headstock, together with the ram where it is mounted, can swivel 360 degrees around the column, thus the machining scope of this vertical drilling machine is greatly expanded;
5. Ram mounted headstock with 600mm ram stroke helps this machine to drill on large workpieces.
Specifications |
Unit |
VD40MT |
Maximum drilling diameter |
mm |
40 |
Maximum tapping diameter |
mm |
M30 |
Distance from spindle centerline to column |
mm |
260-720 |
Column lifting speed |
mm/Minute |
1000 |
Headstock swivel around the column centerline |
Degrees |
±180 |
Headstock tilting angle |
Degrees |
±30 |
Spindle bore taper |
|
MT #4 |
Worktable size |
mm |
1200×500 |
Spindle speeds |
RPM |
42-1865, 12 Steps |
Spindle auto feed range |
mm/Rev. |
0.07-0.4, 4 Steps |
Quill stroke |
mm |
240 |
Main motor power |
KW |
2.2/2.8 |
Ram stroke |
mm |
600 |
Machine size |
mm |
1950×1200×2300 |
Machine weight |
KG |
2500 |