OD 1500mm electro permanent magnetic chuck used on a horizonta lathe to hold workpieces which have thin walls, which might be deformed if being clamped by chuck jaws. It's magnetic suction force is 18kgf/cm2, can be 35kgf/cm2 if requested;
Magnetizing/demagnetizing time is only 0.3 Second and a whole day of operation consumes less than 1 KWH power;
Fine poles with round magnetic circuits radially spread to even locate the magnetic suction forces on any postions of the mangetic chucks;
This electro permanent magnetic chuck has its back mount as A2-15 type to match with the lathe spindle nose. On request, other types of back mounts can be produced on the magnetic chuck;
5 Planes on the workpiece can be machined with one setup. As the power shuts off during the whole machining process, no electo heat will be generated to deform the chuck. And the magnetic suction force will keep very stably holding the workpiece, thus precision machining can be performed;
Steel chuck base has premium rigidity and can work normally for at least ten years;
This elector permanent magnetic chuck can also be used on milling machines, planing machines, drilling presses, vertical lathes, etc.
Audited Supplier 
){kind=link}