Tilting Rotary Tables

Product Description

The tilting rotary table is one of the main accessories for millers, borers and drillers. It can be used for machining, the oblique hole or surface and hole of compound angle at one set-up. Besides this, it is so designed as to be used in a vertical position to carry out center work with a tailstock.

This rotary table can be tilted to any position from 0 deg to 90 deg and locked.

A flange for connecting scroll chuck is specially supplied and be packed independently. For special order, the dividing plate accessory allows the operator to accurately divide the 360 deg rotation of the clamping surface into divisions of 2 through 66 and all divisible of 2, 3 and 5 from 67-132.

 

Specifications	RT160T	RT200T	RT250T	RT320T	RT400T
Diameter of table, mm	160	200	250	320	400
Morse taper of center hole	2#	3#		4#
Diameter of center hole, mm	25X6	30X6		40X10
Width of T-slot, mm	10	12		14
Modules of worm gear	1.5	1.75	2	2.5	3.5
Width of positioning key, mm	12	14		18
Adjacent angle of table T-slot, Deg	90		60
Ratio of worm gear	1:90
Graduation of the table, Deg	360
Tilting angle, Deg	0~90
Readout of handle-wheel, Min	1
Min. reading of vernier, Sec	10
Min. reading of the tilting vernier, Min	2
Indexing accuracy, Sec	80	60
Max. load capacity with table horizontal, Kgf	100	150	200	250	300
Max. load capacity with table vertical, Kgf	50	75	100	125	150
Net weight, Kgs	36	57	80	135	280
Gross weight, Kgs	44	67	93	150	305
Packing size(LXWXH), cm	42X38X30	49X42X31	55X43X33	63X49X40	83X60X46
Diameter of chuck (optional), mm	125	160	200	250	325

	RT160T	RT200T	RT250T	RT320T	RT400T
A	255	296	310	380	500
B	172	213	252	322	400
C	168	186	235	252	306
D	Φ160	Φ200	Φ250	Φ320	Φ400
E	11	14	14	16	16
F	138	175.5	199	241	295
H	100	120	140	175	217
L	160	180	205	255	320
M	MT #2	MT #3	MT #3	MT #4	MT #4
P	40	40	40	40	50
d	Φ25	Φ30	Φ30	Φ40	Φ40
h	6	6	6	10	10