These floor lathes turn workpieces with large diameters and short lengths and thin-wall tube shaped workpieces. High speed steel cutters or carbide cutters can be used on these floor facing lathes to cut various kinds of steels, irons and alloys. Outer / inner cylindrical / tapered surfaces turning, curved surfaces turning, slotting and cutting off etc. Can be performed on these facing lathes.
1. Heavily ribbed single-piece machine base with bed ways hardened and precision ground;
2. Extra wide bed ways for high rigidity and stability in operations;
3. Fully geared headstock with all gears hardened and precision ground, providing a wide range of spindle speeds on these facing lathes;
4. The spindle is supported on a set of precision angular taper roller bearings;
5. Main motor and feeding motor are variable frequency type to perform stepless regulation. This makes the choice of the feeding rates more convenient;
6. Extended type of machines can be customized as per specific requirements.
| Parameters |
Unit |
FL1600A |
FL2000B |
FL3100B |
| Maximum swing diameter over base |
mm |
1600 |
2000 |
2500 |
| Maximum swing diameter in the pit |
mm |
|
|
3150 |
| Maximum workpiece length |
mm |
2000 |
2000 |
2500 |
| Maximum workpiece in pit |
mm |
|
|
800 |
| Maximum workpiece weight held by chuck |
KG |
2500 |
2500 |
5000 |
| Maximum workpiece weight supported between centers |
KG |
8000 |
8000 |
16000 |
| Chuck diameter |
mm |
1600 |
1600 |
2500 |
| Maximum chuck torque |
KN.M |
10 |
25 |
50 |
| Chuck speeds |
RPM |
31.5-160, 18 Steps |
2-100, 18 Steps |
0.8-80, Steps |
| Maximum tool post cutting force |
KN |
16 |
31.5 |
40 |
| Tool post feeding |
mm/min |
0.71-125 |
0.35-63 |
0.12-46 |
| Tool post rapid traverse |
mm/min |
3000 |
3000 |
2020 |
| Tailstock quill travel |
mm |
300 |
200 |
200 |
| Main motor |
KW |
22(AC) |
22(AC) |
40(DC) |
| Machine net weight (Approx.) |
KG |
17800 |
18000 |
32200 |
| Overall size (LxWxH) |
cm |
573×288×235 |
589×288×235 |
763×365×283 |
Audited Supplier 
){kind=link}
){kind=link}